Vitrine Price Quotation by Square Metre or by Piece? Choosing a Pricing Basis for Custom Display Cabinets

Should a bespoke vitrine be quoted per piece or per metre? This guide compares both pricing bases and shows when each one gives buyers a fairer, more comparable figure.

When you request a vitrine price per piece or per metre, the two numbers can look similar on paper but behave very differently once the design changes. Per-piece pricing suits repeated, clearly defined cabinets, while per-metre pricing suits long, flexible wall units. Choosing the right basis early makes quotes easier to compare and reduces disputes later.

This article explains how each method works, where it gives a fair picture, and where it can mislead. It is written for importers, designers, hotel buyers and distributors ordering custom display cabinets from a factory, whether as one project or as a repeated bulk programme.

Why the pricing basis matters

A quotation is not only a number; it is a statement of what is included. The pricing basis decides how that number moves when you add a shelf, widen a bay or change a door type. A basis that does not match your product can hide costs or make two offers impossible to compare.

Neither method is better in general. The useful question is which one reflects how your cabinet is actually built and repeated.

Pricing per piece

Per-piece pricing gives one unit price for a defined cabinet with a fixed drawing, size, finish and fittings. It is the most common basis for standalone vitrines, especially when the same model is ordered in quantity.

When per piece works well

  • Repeated models: the same vitrine ordered 20, 50 or 100 times, where tooling and set-up are shared across the batch.
  • Fully specified items: glass type, lighting, locks, back panel and finish are all fixed in the drawing.
  • Resale and catalogue use: distributors need a clear unit cost to calculate their own margin.
  • Simple budgeting: the total is quantity multiplied by the unit price.

Where per piece can mislead

A piece price is only meaningful for that exact specification. If one supplier quotes a 90 cm (35.4 in) wide cabinet with tempered glass and LED, and another quotes the same footprint with basic shelves and no lighting, the figures cannot be compared directly. Always ask for the specification to be listed beside the price.

Pricing per linear metre

Linear metre pricing furniture quotes assign a rate to each metre of run along the wall. It is typical for bespoke wall units, built-in display walls and modular runs where the length varies from room to room.

When per metre works well

  • Continuous wall units: long runs of vitrines, shelving and storage that follow the room length.
  • Variable lengths: several rooms or shops with different wall widths but the same design language.
  • Early budgeting: a designer can estimate cost from the plan before final details are drawn.

Where per metre can mislead

A metre rate assumes a typical depth, height and level of detail. A tall unit with glass doors, internal lighting and a mirror back costs more per metre than a low unit with open shelves, yet both may be described as one metre. Corners, end panels, fillers and cut-outs are also frequently excluded from the rate, so ask how they are handled.

A note on square metre pricing

Some quotes use the front-face area, meaning width multiplied by height. This accounts for tall units better than a simple linear metre, but it still ignores depth and internal complexity. If you see a square-metre rate, confirm which surfaces are measured and whether doors, glass and lighting sit inside or outside that rate.

Side-by-side comparison

FactorPer piecePer linear metre
Best forDefined, repeated cabinetsLong bespoke wall units
Budget clarityHigh once drawing is fixedGood for early estimates
Flexibility to resizeLow; a size change needs a new priceHigh; length changes scale the price
Hidden cost riskSpecification differencesCorners, fillers, height and fittings
Comparing suppliersEasy if specs matchNeeds a clear definition of the metre
Bulk resellingStraightforward unit costLess direct; needs conversion

What changes the price under either method

Whatever basis you choose, the same factors drive the real cost of a custom cabinet:

  • Core and surface materials: veneer, lacquer, laminate or solid wood.
  • Glass: thickness, type and edge work.
  • Lighting: LED strips, drivers and wiring.
  • Hardware: hinges, locks and soft-close fittings.
  • Dimensions and complexity: height, depth, curves, corners and integrated panels.
  • Packing and shipping: glass cabinets need protective packing, and the Incoterm affects what the quote covers.

We do not publish fixed rates here, because the figure depends on the drawing, the materials and the quantity. A quotation based on your actual project is the only reliable way to see cost.

How to choose the right basis

  1. Is the cabinet a repeated model? If yes, ask for a per-piece price with a full specification list.
  2. Is it a continuous wall run with varying lengths? A per-metre rate, with defined height and depth, is usually fairer.
  3. Is it a mix? Many projects combine standalone vitrines and wall units. Price each part on its natural basis and total them in one offer.
  4. Is it a bulk programme for resale? Use per-piece prices, and request the same structure for every model so margins are easy to calculate.

Questions to ask before accepting a quote

  • What height, depth and finish does the metre or piece rate assume?
  • Are glass, lighting, locks and back panels included?
  • How are corners, end panels and fillers priced?
  • Does the price include export packing, and under which Incoterm?
  • What happens to the price if the dimensions change after drawing approval?

Asking these questions makes it much easier to compare a custom cabinet quotation from different factories on equal terms. It also helps your own team keep a clear display cabinet cost basis from first estimate to final order.

Working with drawings makes either method reliable

Both pricing methods become more accurate when the factory has a dimensioned drawing or a clear reference image. With drawings, we can confirm the measurements, list the specification and show how a change in size affects the total. Without them, any rate is only an estimate.

Conclusion

For repeated, fully defined vitrines, price per piece gives the cleanest comparison. For long bespoke wall units with changing lengths, a per-metre rate is more practical, provided its height, depth and inclusions are written down. If you are unsure, send us your drawings, photos or room dimensions, and we will prepare a quotation on the basis that suits your project, for single orders or bulk supply to markets worldwide.

Sıkça Sorulan Sorular

Is it better to quote a vitrine per piece or per metre?

It depends on the product. Per piece suits defined cabinets ordered in quantity, because the specification is fixed. Per metre suits long bespoke wall units whose length varies between rooms. For mixed projects, price each part on its natural basis within one offer.

What does a per-metre rate usually include?

It varies by supplier, so ask. A rate normally assumes a stated height, depth and finish. Corners, end panels, fillers, glass, lighting and locks are often separate. Request a written list of inclusions before comparing offers.

Can I compare two vitrine quotes with different pricing bases?

Yes, but only after converting both to the same specification. Ask each supplier for the full list of materials, glass, hardware and packing, then calculate the total for your actual quantity or wall length rather than comparing the headline rates.

Does the price change if I alter the size after approval?

Usually yes. A per-piece price applies to the approved dimensions, so a size change normally means a revised price. Per-metre pricing scales more easily with length, but changes in height, depth or fittings can still affect the total.

Which pricing basis is best for bulk orders for resale?

Per-piece pricing is generally easier for distributors, because each model has a clear unit cost for margin calculation. Ask for a consistent quotation format across all models, including packing and the agreed Incoterm.

Every hotel project is different. Send us your drawings or room schedule for a tailored proposal on materials, lead time and shipping.

Related products

All Console Table Models

Get a quote for Console Table Models

Share dimensions and quantities; we will prepare a quote for your project.