Console Table Collections Showcase: Six Wooden Model Families Available for Custom Orders
A practical overview of six wooden console table families we build to order for hospitality projects, with typical sizes, materials and what can be customised. Use it to shape a clear enquiry.
A wooden console table collection works best when you can see the logic behind it: a handful of proven model families, each with typical proportions, materials and limits for change. This showcase describes six families that Palmiye builds to order in our Istanbul factory for hotels, restaurants and residential developments worldwide. It is not a fixed catalogue; think of it as a starting map for your enquiry.
How to read this collection
Every piece is made to project drawings, so the families below are design languages rather than stock items. Sizes are typical ranges, not limits. If your niche, corridor or reception wall needs something different, we adjust the drawing and confirm what the change means for cost and lead time.
For each family you will find the typical use, common dimensions, material options and customisation limits. Dimensions are given in metric first, with imperial in brackets.
Family 1: Classic slim rectangular consoles
This is the workhorse of hotel console designs. A straight top on four legs or two panel ends, it suits entrances, corridors and guest room niches.
- Typical size: length 90-180 cm (35-71 in), depth 25-40 cm (10-16 in), height 75-90 cm (30-35 in).
- Materials: solid oak, ash or beech frames with veneered or solid tops; walnut for darker schemes.
- Customisation: leg profile, top edge, finish and colour are easy to change. Very narrow depths below roughly 20 cm (8 in) need a stability review.
Family 2: Drawer and shelf consoles
Here the console carries storage: one or two shallow drawers, or a lower shelf for baskets and decor. They work well in suites, reception areas and restaurant service points.
- Typical size: length 100-160 cm (39-63 in), depth 35-45 cm (14-18 in), height 78-90 cm (31-35 in).
- Materials: veneered MDF or plywood carcasses with solid wood fronts and edges are common for stable, repeatable batches.
- Customisation: handle style, soft-close runners, cable cut-outs and concealed locks. Drawer depth is limited by the table depth, so confirm what you need to store.
Family 3: Wall-mounted floating consoles
Floating models free the floor for cleaning and make small rooms feel larger. They are popular in guest room entries and corridors.
- Typical size: length 80-140 cm (31-55 in), depth 20-35 cm (8-14 in), thickness 30-60 mm.
- Materials: veneered or solid wood tops over a hidden steel or timber bracket.
- Customisation: finish, thickness and edge profile. Load capacity depends on the wall construction, so we need your wall type and fixing method before finalising the drawing.
Family 4: Curved and demilune consoles
Half-moon and softly curved tops add a sculptural touch to lobbies and boutique entrances. They are made with bent laminations or shaped solid wood, which affects cost and tolerance.
- Typical size: width 80-150 cm (31-59 in), depth 35-50 cm (14-20 in), height 76-90 cm (30-35 in).
- Materials: veneered curved panels, solid wood legs, optional stone or glass tops.
- Customisation: radius and leg shape. Tight radii and very thin curved sections have design limits, so share your reference early.
Family 5: Fluted and carved consoles
Vertical flutes, reeded fronts and carved details bring texture to contemporary and classic interiors. They are well suited to reception backdrops and feature walls.
- Typical size: length 100-200 cm (39-79 in), depth 30-45 cm (12-18 in), height 80-95 cm (31-37 in).
- Materials: solid oak or walnut for deep profiles; veneered fluted panels for lighter, more budget-aware builds.
- Customisation: flute width and spacing, carving pattern, finish. Intricate hand-carved details add production time, so plan sampling accordingly.
Family 6: Mixed-material consoles
These pair a wooden base or top with metal, stone, glass, rattan or cane. They help a hotel express a regional or brand character without losing the warmth of timber.
- Typical size: length 100-180 cm (39-71 in), depth 30-45 cm (12-18 in), height 76-90 cm (30-35 in).
- Materials: timber with brass, black steel, marble, engineered stone, tempered glass or woven cane.
- Customisation: metal finish, stone selection and top thickness. Heavy stone tops change packing and anchoring needs, which we address in the drawing.
Quick comparison of the six families
| Family | Best for | Typical depth | Main limit to check |
|---|---|---|---|
| Slim rectangular | Corridors, entries | 25-40 cm | Stability at very shallow depth |
| Drawer and shelf | Suites, service points | 35-45 cm | Usable drawer depth |
| Floating | Small rooms | 20-35 cm | Wall type and load |
| Curved and demilune | Lobbies, boutiques | 35-50 cm | Minimum radius |
| Fluted and carved | Feature walls | 30-45 cm | Detail time and cost |
| Mixed-material | Signature pieces | 30-45 cm | Weight and packing |
What you can always customise
Across all six families, a few parameters are usually flexible. Size within sensible proportions, timber species, veneer or solid construction, stain or lacquer colour, hardware and edge details can all be adjusted. Branding elements such as engraved plates or room-number details can also be added.
Some limits apply everywhere. Fire-retardant requirements, extreme depths, very large single-piece tops and heavy loads need a technical check. We would rather tell you early than discover it at the mock-up stage.
Matching a family to your project
Start with the space, not the model. Measure the wall length, available depth, clearance to circulation routes and any skirting or socket positions. Then choose the family that fits the use: storage points to drawer models, tight corridors to floating or slim designs, and brand-led lobbies to curved, fluted or mixed-material pieces.
If you are furnishing several room types, you can combine families under one finish and hardware language so the hotel reads as a coherent whole. That approach also keeps batch production efficient.
From enquiry to delivery
We build to order and ship worldwide, so the process is the same whether your project is in Europe, the Middle East, Central Asia or Africa. A typical path looks like this:
- You send drawings, photos or a sketch with approximate sizes and quantities.
- We review feasibility and propose materials and construction.
- We prepare shop drawings and a sample or prototype for approval.
- Production runs to the approved sample, followed by export packing.
- Shipping is arranged under the Incoterms you prefer, such as EXW, FOB, CIF or DAP.
Lead time and cost depend on quantity, timber, finish complexity and sampling rounds, so we confirm them against your specific drawings rather than quoting a general figure.
What to include in your enquiry
- Intended space and number of pieces per type.
- Target dimensions or the niche size.
- Preferred timber and finish, or a reference image.
- Any fire, accessibility or wall-fixing requirements.
- Destination country and preferred shipping terms.
Next step
If one of these families is close to what you have in mind, send us your drawings, photos or room schedule. We will review them and come back with material suggestions, customisation options and a project quotation.
Sıkça Sorulan Sorular
Are these console models available as ready stock?
No. All pieces are made to order to your drawings and approved samples. The six families act as design starting points, so we can adapt size, timber, finish and hardware to your project instead of limiting you to fixed catalogue items.
Can you build a console from a photo or sketch?
Yes. A reference photo, hand sketch or CAD file is enough to begin. We review feasibility, prepare shop drawings with dimensions and construction details, and ask you to approve them before any sample or production work starts.
Which wood species can I choose for a custom console?
Common options include oak, walnut, ash and beech, in solid wood or veneer. The best choice depends on your design style, budget, finish and location. We can suggest a species once we know where and how the piece will be used.
Do you ship wooden console tables internationally?
Yes, we ship worldwide from Istanbul. Pieces are packed for export to protect legs, edges and any stone or glass tops. We can work with terms such as EXW, FOB, CIF or DAP, depending on what suits your project.
How long does a custom console order take?
It depends on quantity, timber, finish complexity and how many sample rounds are needed. We do not quote a generic figure. Once we see your drawings and quantities, we confirm a realistic schedule linked to your opening date.
Can one design be made in several sizes for the same hotel?
Yes. A single design can be produced in different lengths or depths for different room types or public areas, while keeping the same finish and details. This helps the hotel look consistent and keeps production well organised.
Every hotel project is different. Send us your drawings or room schedule for a tailored proposal on materials, lead time and shipping.




